HPE Community
HPE EVA Storage
1753826 Members
8556 Online
108805 Solutions
New Discussion юеВ

Re: HP MSA CONTROLLER SCSI Array Device/MSA1000 missing driver in Device Manager

 
Stephan Hendl
Contributor

тАО11-08-2010 12:49 AM

тАО11-08-2010 12:49 AM

HP MSA CONTROLLER SCSI Array Device/MSA1000 missing driver in Device Manager

I've installed a MSA1000 in Windows 2003 R2 x64 and can use all disks as well as configure it via ACU but under "Device Manager" I still see two entries "HP MSA CONTROLLER SCSI Array Device". That prevents the SMH from seeing the MSA and getting events via HPSIM. HpMpioFFMSAv3.02 is installed. What is missing?

Regards, Stephan
0 Kudos
Reply
2 REPLIES 2
HanCas
Valued Contributor

тАО12-30-2010 01:10 AM

тАО12-30-2010 01:10 AM

Re: HP MSA CONTROLLER SCSI Array Device/MSA1000 missing driver in Device Manager

I assume you have Active/Active MSA? Did you install the MPIO and DSM for A/A?
If active Passive, did you install the MPIO for A/P and the DSM?
.
0 Kudos
Reply
ColH
Advisor

тАО12-31-2010 06:09 AM

тАО12-31-2010 06:09 AM

Re: HP MSA CONTROLLER SCSI Array Device/MSA1000 missing driver in Device Manager

Have you tried running the SmartSmart driver update on this machine and this may fix it. normally fixed by re-installing either HP SCSI driver or FC driver.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.