cancel
Showing results for 
Search instead for 
Did you mean: 

Re: san switch 4/8

 
SOLVED
Go to solution
Highlighted
Advisor

san switch 4/8

Hello ,

When connecting to the switch GUI and login with admin privilege ,there isn't zoning Tab in the screen ,any help ?

Thanks by advance .
5 REPLIES 5
Highlighted
Honored Contributor

Re: san switch 4/8

Hello,

would you please provide us the output of the "licenseShow" command. You can run this command from the command-line.

What version of Jave Runtime do you use?

Best regards,
Patrick
Best regards,
Patrick
Highlighted
Valued Contributor

Re: san switch 4/8


Hi,

If there is Zoning license installed and if GUI still does not bring up Zone Tab, possible issue could be with Java Version.

Try deleting Java from the PC, browse back into the switch and let it prompt for a Java install, to check if the Zone tab returns.

Regards,
Prabhu
Highlighted
Honored Contributor

Re: san switch 4/8

What is the firmware version on the switch?

It should tell you right on the first page of the web gui.

Or telnet to the switch and run...

version
switchshow

and post the output here.

Steven
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)
Highlighted
Solution

Re: san switch 4/8

First, what version of firmware is running, and, what username are you using? If *not* "admin", you may (probably?) be running into an issue with the new "Admin Domains". Brocade has a white-paper on their website that discusses them.

With recent versions of the Brocade firmware, there is no "zoning Tab". "Zone Admin" is an option on the treeview panels on the left; close to "Switch Admin" and "Port Admin".

You don't need to delete Java, what you need to do is: get in to the Control Panel, go to the Java Control Panel. Look for Temporary Internet Files, and Delete (all) Files. On mine, the Delete Files button is "inside" the Settings controls.


Finally, don't forget to APPLY YOUR POINTS! You have assigned points to only 4 of 20 responses.

WHY SHOULD YOU DO THIS?
There are 3 reasons why rating replies is such an important feature:

1.) Others have taken time to help you, so please give them credit for their help.
2.) Your rating will help your peers earn points toward their Forums status, and you will validate the quality of the solution you've received.
3.) Other readers will understand which answer best solved a problem, enriching the community knowledge being shared.

Points should be applied to EVERY MESSAGE in the thread of ANY AND ALL of your questions that have "Unassigned" next to the date and time. Go to your profile, and click on the "Questions or topics with unassigned points" link. The button to apply points is on the bottom of each thread's page.

Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo

Advisor

Re: san switch 4/8

Dear Smith,

Smith you are giving the right solution ,there is no "zoning Tab" in this version of firmware (6.1.0). the Zone Admin is an option on the treeview panels on the left .

Many thanks ,

ryadh .