EVA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Support for booting from SAN

 
Highlighted
Regular Advisor

Support for booting from SAN

I,
I have a storage array EVA P6500 Dual Controller FC and 1 GB iSCSI (AJ939A) in fabric mode with two switches FC brocade 300 (SAN Switch HP 8/24) with several servers connected to these switches using FC HBAs. The connections is 8 Gb/s
I want to install a linux server with their SO in the SAN (boot from SAN)


My question is:
Is it possible booting from SAN with the array and the switches listed above ?

Please, provide me any clues according your experience.

Thanks in advance,
Roger

 

 

p.S. This thread has eben moved from General to Storage Area Networks (SAN) (Enterprise). - Hp Forum Moderator

Roger
1 REPLY 1
Highlighted
Acclaimed Contributor

Re: Support for booting from SAN

You need to go into the FC HBA BIOS of the server and adjust the boot settings.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!