Other HPE Product Questions
1748214 Members
3197 Online
108759 Solutions
New Discussion

xw8600 5 beeeps 2 second pause repeat but no boot.

 
hput3
Occasional Contributor

xw8600 5 beeeps 2 second pause repeat but no boot.

Setup is HP xw8600 produced in 2008.

Unable to boot: But getting 5 beeps, 2 second pause ... repeat

Digging in the manuals I learned the 5 beeps probably means a problem with 1 or more memory modules.

I have no experience with repairing HP xw8600 so before tearing into it I'd like to get a little more

advice. What, if anything, can I do to diagnose more about the problem? Anything more short of pulling out memory mods and trying them 1 by 1?

Am I likely to ruin something If I do pull all memory mods and try boot on each one.

If a single memory module is OK, what wiill happen on starting machine with only 1 mem module in place?

Or, is it smarter to test by removing 1 module, see if starting up works, then the next, etc.?

1 REPLY 1
Parvez_Admin
Community Manager

Re: xw8600 5 beeeps 2 second pause repeat but no boot.

Hi  @hput3 

You have reached the wrong company for HP products. 

This community is for customers and friends of Hewlett Packard Enterprise, which is an independent company.

For HP products, you may have to register and post in the HP Support Forums: https://h30434.www3.hp.com/ or Please visit www.hp.com.


Thanks,
Parvez_Admin
I work for HPE
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
CM_Cert_Logo_Color.png