HPE Community
ProLiant Servers - Netservers
1751809 Members
4822 Online
108781 Solutions
New Discussion

ML370 and iLO problems

 
jON Sads
Occasional Contributor

‎12-31-2005 04:43 AM

‎12-31-2005 04:43 AM

ML370 and iLO problems

I have a fairly recent ML370 G3. I have configured the iLO to allow extra users but no matter what I do I cannot log in as anything but the Administrator with the default password (which I deliberatley leave unchanged because I always record the iLO tag information). I have tried telnet and HTTP. Furthermore, the telnet session does not allow ANY user to log in even the Administrator! As this is integrated iLO and I have already had a CPU failure on this server I am beginning to wonder whether there is a system board fault of some kind. I have applied the latest drivers and flashed the firmware to the latest. Does anyone have any suggestions please?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.