Disk Enclosures
1748247 Members
3572 Online
108760 Solutions
New Discussion юеВ

Re: SA P400 Array Accelerator Batteries Failed to Charge

 
Go to solution
PAUL FARINELLI
Advisor

SA P400 Array Accelerator Batteries Failed to Charge

Is it safe to proceed after getting these messages when booting HP-UX 11iV3 on an rx6600?

HP Smart Array P400 Controller (version 5.20) 1 Logical Drive

1794-Drive Array - Array Accelerator Battery Charge Low

Array Accelerator Posted-Write Cache is temporarily disabled.

Array Accelerator batteries have failed to charge and should be replaced

 

 

P.S. This thread has been moevd from Disk to Disk Array. - Hp forum Moderator

2 REPLIES 2
marsh_1
Honored Contributor
Solution

Re: SA P400 Array Accelerator Batteries Failed to Charge

paul,



have a look here at number 1794 , i'd get them replaced asap :-

http://docs.hp.com/en/J6369-90072/apcs01.html

good luck

cnb
Honored Contributor

Re: SA P400 Array Accelerator Batteries Failed to Charge

Hi Paul,

Yes, but there are operational cautions that you need to be aware of until they are replaced.

http://docs.hp.com/en/J6369-90072/ch01s03.html

http://h18004.www1.hp.com/products/quickspecs/12400_div/12400_div.pdf

405835-001 512MB battery backed write cache (BBWC) memory board - 72-bit, DDR - For Smart Array P400 controller

-or-

405836-001 256MB battery backed write cache (BBWC) memory board - 40-bit, DDR - For Smart Array P400 controller


HTH,