HP ML150G6 - 510-BMC Sel is Full

[Filippo Viglianisi]

When starting my server I receive this message

BMC Responding
510-BMC Sel is Full

Then I accessed the BIOS but I didn't found the way to clear the BMC log.

How can I clear the log??

Thanks a lot for your answers

[Erdogan Temur · Accepted solution]

Hi,

1. Boot the server and press the F10 key when prompted to run BIOS Setup.
2. Select the "Advanced" menu.
3. Scroll down to "IPMI" and press the ENTER key
4. Scroll down to the System Event Log and press the ENTER key.
5. At the "Clear System Event Log" selection, press the ENTER key to toggle between "Enable" and "Disable."
6. Select "Enable."
7. Press the F10 key to Save the changes and exit the BIOS Setup

That will also fix the problem :) Remember to assign points to answers that helped in your problem. So the forum stays alive...

[raggimarteins]

We have had a problem with this kind of server and it stops frequently.  When I saw this message I did what the solution told, cleared the system log in biom (BMC).  Could that cause the system stop?  There was something about CPU fan..