HPE Community
Integrity Servers
1752781 Members
6180 Online
108789 Solutions
New Discussion

Re: change the ILO IP on rx2660.

 
itrc55
Regular Advisor

‎03-09-2012 11:29 PM

‎03-09-2012 11:29 PM

change the ILO IP on rx2660.

Hi,

 

i have rx2660 servers run HP-UX 11.31 operating system, How can i change the ILO IP address

of this server remotely and locally ? where i can login to current IP address remotely.

 

Thanks

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎03-10-2012 03:39 AM

‎03-10-2012 03:39 AM

Re: change the ILO IP on rx2660.

Try from SMH:

http://server-ip:2301

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
S_Logan
HPE Pro

‎03-21-2012 07:53 AM - edited ‎03-21-2012 07:53 AM

‎03-21-2012 07:53 AM - edited ‎03-21-2012 07:53 AM

Re: change the ILO IP on rx2660.

Hi,

 

You can also try LC command in MP iLO.

 

1) Login to the MP ( Telnet to the existing MP IP Address)

Username and Password would be Admin/Admin

2) Go to MP Main Menu then Command Menu by typing CM

You will be placed in MP:CM

3) The Type LC , you will see the existing configuration

MP:CM>LC

4) You can change the configuration as per yor requirement.

 

 

HTH

Surendar

How to assign KUDOS! Click the STAR!

HP Guided Troubleshooting - www.hp.com/support/hpgt

 

 

I work for HPE

Accept or Kudo


[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.