Operating System - Tru64 Unix
1752798 Members
5648 Online
108789 Solutions
New Discussion юеВ

TRU64-unix 5.1A cluster crashed

 
EliGibbor
New Member

TRU64-unix 5.1A cluster crashed

I have cusomer with 2 DS25 in cluster and 1 server crashed ,The server with UNIX 5.1A ( REV 1885 ) and cluster 1.6
The error that I got in crash dump is:

luster alias subsystem enabled
MEMORY CHANNEL API - initializing
Environmental Monitoring Subsystem Configured.

trap: invalid memory read access from kernel mode

faulting virtual address: 0x0000000000000000
pc of faulting instruction: 0xfffffc000065d1f4
ra contents at time of fault: 0xfffffc0000de3fcc
sp contents at time of fault: 0xfffffe0544ec74c0

panic (cpu 1): kernel memory fault
syncing disks... dump device name: dsk21-01, num: 0x130015d, off: 0x10, len: 0x5dc000

LSM attempting to dump to device at major 19 minor 349

dump device name: dsk1b-01, num: 0x1300288, off: 0x0, len: 0x5dc000

LSM attempting to dump to device at major 19 minor 648

"'
Any idea what cause the server to crash?
3 REPLIES 3
Johan Brusche
Honored Contributor

Re: TRU64-unix 5.1A cluster crashed

+

If the system was able to reboot after the crash, there should be a recent crash_data.x in /var/adm/crash/ then please post that here.
The posted output is not sufficient to determine a possible cause for the crash.

Rgds.
\ Johan.

+

_JB_
EliGibbor
New Member

Re: TRU64-unix 5.1A cluster crashed

Uwe_9
Advisor

Re: TRU64-unix 5.1A cluster crashed

I see two different crashes there.
One (.9) is related to virtual memory handling and the other (.10)
does look like a issue with the aha_chim (SCSI-Adapter) - Driver.

I guess your next question is..."What can I do to avoid this ?"

There are two points that I would go for...

1-the crashed node is a AlphaServer DS25 running on Firmware: 6.8-18
the most recent Firmware is Version 7.3 ! See:
http://h18002.www1.hp.com/alphaserver/firmware/readmes/ds25.html
I would go for a update of the Firmware.
(Don't forget to check the other node for this too !)

2-if you have to stay on 5.1A, well...go and look if you have all
additional early release patches installed, if not get and install them.
http://h30097.www3.hp.com/unix/EarlyReleasePatch-download.html

Better would be a consideration if you can go/upgrade to 5.1B-5
but that is only my humble opinion.

Greetings,
--Uwe.