All User IDs on a RILOE II become hidden when...

[Robert Berrie_2]

... the Administrator id "User Name" has a "\" appended to it (at least in the Web interface). (this may work for other user ids as well. Administrator happens to be at the top of my user list -- so it may work for the 1st User Name in the list as well) Firmware is v1.16. After adding the "\" to the Administrator User Name (not the login name) there is an error regarding an unterminated string -- then no user names are displayed. I had to use the F8 Text Mode setup to remove the "\" from the Administrator's User Name field -- then all user were once again visible. Bug? Undocumented Feature? Can anyone else reproduce?

[M.S.Srivatsa]

I have been able to reproduce this problem
with 1.16 firmware.
This is a problem with RILOE-II firmware.
Administrator can logon without any problems.
Also the same scenario holds good for other users.

I am just looking for a alternative workaround for this problem at this point.
(Apart from using RBSU)
I am going to update if i can find any alternative workaround.

[acartes]

This sounds like somtehing effecting an embedded HTML tag is causing problems with the rendering of the user name in the browser.

As a workaround, I recommend avoiding the use of slashes (/ \) and tags etc.