HPE Community
Server Management - Remote Server Management
1752619 Members
4355 Online
108788 Solutions
New Discussion

Changing the DHCP server address in iLO

 
Jared R.
New Member

‎03-10-2007 05:34 AM

‎03-10-2007 05:34 AM

Changing the DHCP server address in iLO

I was wondering how I can change the DHCP server address in iLO. The field is currently greyed out.

iLO Firmware Version: 1.80

Thanks for your help.
0 Kudos
Reply
1 REPLY 1
pratap m keshava
Trusted Contributor

‎03-11-2007 05:11 PM

‎03-11-2007 05:11 PM

Re: Changing the DHCP server address in iLO

In the Administration -> Network settings options in iLO page,
Enable DHCP: should be set to "Yes". Then all the fields related to DHCP will be enabled which you can modify. You need to apply settings which will reboot iLO and once the reboot is completed, iLO should fetch network credentials from DHCP server.
just a suggestion, not a requirement. You can upgrade the firmware to 1.89 which is latest.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.