Server Management - Remote Server Management
1748134 Members
3596 Online
108758 Solutions
New Discussion юеВ

iLO 100i disable unsecure services?

 
DL160G5Admin
New Member

iLO 100i disable unsecure services?


Hi,

I was wondering if there was a way to disable telnet, HTTP, etc. on the iLO 100i and only allow SSH and HTTPS access. I did not see anything in the BIOS (ROM SETUP Utility), is this something that can be adjusted via SMASH CLP, IPMI or some other method?

Thanks for listening.

-- Sander
5 REPLIES 5
Change_happens
Honored Contributor

Re: iLO 100i disable unsecure services?

this is available in bios settings.. Advance settings.
See below page:
http://docs.hp.com/en/5991-4851/ch03s04.html
DL160G5Admin
New Member

Re: iLO 100i disable unsecure services?

I am not seeing that on the DL160G5, so I figured there maybe another way?
Blazhev_1
Honored Contributor

Re: iLO 100i disable unsecure services?

Hi,

according to the user guide :

1. Press the F10 key during POST to enter the BIOS Setup Utility.
2. Press the right arrow (├в ) key to navigate to the Advanced menu.
3. Press the down arrow (├в ) key to scroll to IPMI.
4. Scroll to the BMC LAN Configuration menu by pressing the down arrow (├в ) key. Press the Enter key.

From there you should be able to disable telnet and HTTP.

regards,
Pac
Blazhev_1
Honored Contributor

Re: iLO 100i disable unsecure services?

Now i saw Ajay's POST...

you can check page 51:

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01325507/c01325507.pdf

either you can't see it, or user guide lies :)

Pac
habibalby
Frequent Advisor

Re: iLO 100i disable unsecure services?

Heloo,

I'm facing the almost the same problem when i try to access one of my Blade Servers. I receive the below error in FireFox and in IE, after it's redirect to HTTPs, i got Page cannot be Displayed.

Could not establish an encrypted connection beacuase certificate presented has invalid signature

Any help