Server Management - Remote Server Management
1748146 Members
3690 Online
108758 Solutions
New Discussion

Spurious Critical Errors on blades + Cannot download 1.60 firmware

 
tdm4
New Member

Spurious Critical Errors on blades + Cannot download 1.60 firmware

Hi I have two questions:

1) I'm getting spurious critical errors on my blades. On the Onboard Admin console, all the blades get a red/white X on them. Clicking on the blade, shows the loading bar for a quite long time, then it times out saying it can't read the sensor information. If I go into the individual iLO2 web admin console, everything is green and fine. I had to reboot the Onboard admin.. and that's when all the Blades came up with red X's. The iLO2s are all running Firmware 1.26 11/17/2006

2) I cannot download the firmware to v1.60. The link goes to an empty FTP directory. (The link from the "Obtain Software" link in the download/support area is using a malformed http link but it really should be ftp.) In any event, I cannot even download the .bin firmware file to apply online. Any ideas?