HPE Community
Server Management - Remote Server Management
1752565 Members
5402 Online
108788 Solutions
New Discussion

ILO on ML115 G5 with FreeBSD

 
Jan Becher
New Member

‎02-26-2010 06:01 AM

‎02-26-2010 06:01 AM

ILO on ML115 G5 with FreeBSD

Hi,

I have a ML115 G5 running FreeBSD, but as soon as I install a ILO (HP ProLiant 100 G5 Lights-Out 100c) in the server, It's not starting up, but failing with the error:
Rear fan not running - shutting down.

And just for the record: The rear fan are running

I have tried changing the ILO-card and the server, but it's the same.

Any suggestions
0 Kudos
Reply
1 REPLY 1
Lima Alpha
New Member

‎04-22-2010 03:58 PM

‎04-22-2010 03:58 PM

Re: ILO on ML115 G5 with FreeBSD

If the bios version of ML115 is jul 09 then the version firmware of ilo must be 3.11

In http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01325507/c01325507.pdf
are the instructions for remotely updating the ilo firmware with server off.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.