Server Management - Remote Server Management
1748255 Members
3975 Online
108760 Solutions
New Discussion юеВ

iLO3 not responsiv

 
Go to solution
Ralf Gerresheim
Frequent Advisor

iLO3 not responsiv

Hi,

I have a problem with 3 DL380G7 with iLO3, FW is already 1.15:
After unplug power and reconnect power, the interface is working for some time. Then, the interface becomes unreachable via browser, while ping on IP-address is still possible.
IE and Firefox we have tested, so it is not a browser problem.

Any ideas how to get the iLO running stable?

Thanks in adavance?
20 REPLIES 20
Oscar A. Perez
Honored Contributor

Re: iLO3 not responsiv

We have received reports of this happening and we are investigating.
Are you running in your network a port scanner tool like Nessus, Foundstone, etc?



__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!
Ralf Gerresheim
Frequent Advisor

Re: iLO3 not responsiv

No,

we are not using any port scanner.
Ralf Gerresheim
Frequent Advisor

Re: iLO3 not responsiv

Sorry, correction:

Port-scanner Foundstone is used.
Oscar A. Perez
Honored Contributor

Re: iLO3 not responsiv

Interesting. The other report I'm investigating is also mentioning FoundStone.
I would suggest to configure FoundStone to skip those subnets where your iLO are residing and see if the issue goes away. This would confirm for sure FoundStone is causing iLO3 webserver to go down.



__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!
Dean Allendorf
Occasional Advisor

Re: iLO3 not responsiv

Intresting. Having same issues on DL585 G7 iLO3 FW at 1.15. We are running Foundstone also.
Oscar A. Perez
Honored Contributor

Re: iLO3 not responsiv

Can you guys please confirm that iLO3 still responds to ping and that you are still able to access iLO3 from the local subnet? This is important.



__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!
0644hunt
Occasional Advisor

Re: iLO3 not responsiv

The above is what is happening to me, local subnet ok and ping.
Dean Allendorf
Occasional Advisor

Re: iLO3 not responsiv

I can ping the ilo from remote and local subnets but the website is not responding. Going to run a foundstone test today to see if maybe foundstone is causing this issue.
Dean Allendorf
Occasional Advisor

Re: iLO3 not responsiv

We ran foundstone and it looks like it may have knocked down two of our ilo3 cards. We are going to try and isolate these card on a separate vlan that does not have foundstone running on it. Also it looks like the ilo2 cards used to have this issue also.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02629048тМй=en&cc=us&taskId=101&prodSeriesId=3331044&prodTypeId=15351