HPE Community
Security e-Series
1751976 Members
4658 Online
108784 Solutions
New Discussion

NPS config to authenticate cli/web access for HP5820

 
kevinhobson200
Occasional Contributor

‎08-13-2012 12:27 PM

‎08-13-2012 12:27 PM

NPS config to authenticate cli/web access for HP5820

Hi,

I configured a HP5820 to authenticate access via RADIUS and now i am dropped into the cli at level 0 and i have very few options if i access it from the http. I configured the AV VSA on the NPS hp-privilege-level=0 with vendor id 11 and vendor id 1 but i am still getting very few commands when i login. This isn't a issue in the CLI as i can super 3.

However other uses prefer to use to configure the switch via the gui.

Has anyone ever implemented this?

 

Thanks

 

Kev

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.