Aruba & ProVision-based
1747988 Members
4842 Online
108756 Solutions
New Discussion юеВ

Re: Firmware upgrade fails with message Aborted, wrong file

 
Go to solution
seymour999
Frequent Advisor

Firmware upgrade fails with message Aborted, wrong file

Attempts to upgrade a 3500yl-48G PoE switch (J8683A) using the menu or CLI repeatably fail with the above message.

Old primary is K.12.16, new is K_15_12_0012.swi

 

Switch has licenses (OSPF, VRRP etc), and I downloaded the licenses version of the new firmware.

 

Clues welcome.

 

TIA,

Evan

 

2 REPLIES 2
Richard Litchfield
Respected Contributor
Solution

Re: Firmware upgrade fails with message Aborted, wrong file

I think you will need to go through several iterations (and it will say exactly what is required in the readme file!)

Most likely K12 --> K13 --> K14 --> K15
seymour999
Frequent Advisor

Re: Firmware upgrade fails with message Aborted, wrong file

Thanks, Richard - that did work.

 

Only needed two steps between, but your approach is correct.

 

Evan