HPE Community
M and MSM Series
1752794 Members
5739 Online
108789 Solutions
New Discussion

MSM430 Connect to ProCurve 2530 No Ethernet LED Indicator

 
Shuan
Occasional Visitor

‎02-13-2014 09:45 PM

‎02-13-2014 09:45 PM

MSM430 Connect to ProCurve 2530 No Ethernet LED Indicator

Dear all,

 

I'm new to MSM430.

I've problem accessing the web interface of our new unit.

After guided by HP support, I've flushed the recovery image provided and managed to access web interface using LAN cable (through PoE Injector).

 

After configured, I connect MSM430 to our ProCurve 2530(through PoE Injector as well) and there's no Ethernet LED on the device.

 

Did I miss out anything?

 

Regards,

Shuan

0 Kudos
1 REPLY 1
Arimo
Respected Contributor

‎02-19-2014 05:42 AM

‎02-19-2014 05:42 AM

Re: MSM430 Connect to ProCurve 2530 No Ethernet LED Indicator

This doesn't seem like an MSM issue. I'd look at the PoE injector first.

HTH,

Arimo
HPE Networking Engineer
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.