cancel
Showing results for 
Search instead for 
Did you mean: 

Build and configurations

 
Highlighted
Regular Advisor

Build and configurations

Anyone have any good docs on building and configuring HP-UX systems for pa-risc or Itanium?
5 REPLIES 5
Highlighted
Acclaimed Contributor

Re: Build and configurations

More than you can read:

http://docs.hp.com/

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Regular Advisor

Re: Build and configurations

thanks...... I ws hoping to not search for them.
Highlighted
Honored Contributor

Re: Build and configurations

i think the docs for related this can be found here

http://docs.hp.com
a warrior never quits
Highlighted
Acclaimed Contributor

Re: Build and configurations

Hi Adam:

If by "building" you mean installing, then start with the Installation and Update Guide for the release you want; e.g.

http://docs.hp.com/en/5992-1978/index.html

Of course, your question far too general. There are considerable resources here:

http://docs.hp.com/index.html

Regards!

...JRF...
Highlighted
Acclaimed Contributor

Re: Build and configurations

Hi (again):

> thanks...... I ws hoping to not search for them.

Gee, that is hard, isn't it. You never defined the discrete aspects that you wanted to learn.

...JRF...