HPE Community
Operating System - HP-UX
1753773 Members
5548 Online
108799 Solutions
New Discussion юеВ

fbackup poblem

 
ROHITH_1
New Member

тАО10-22-2008 11:43 PM

тАО10-22-2008 11:43 PM

fbackup poblem

exit code=2 comming while taking fbackup
in hp-ux 10.20 the error is as follows
Full backup started on mild220 : Thu Oct 23 07:01:08 IST 2008 (Scheduled Backup)
{ fbackup -0 -u -g /etc/sam/br/graphNFAa01890 -I /var/sam/log/br_index.full -c /etc/sam/br/fbackup_config -d /var/adm/fbackupfiles/dates -f /dev/rmt/0m } 2>&1
Full backup failed on mild220 : Thu Oct 23 07:01:14 IST 2008 .
Exit code = 2

the dat drive used is dds4 server model is HP D CLASS 9000
0 Kudos
Reply
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО10-23-2008 12:05 AM

тАО10-23-2008 12:05 AM

Re: fbackup poblem

Did this DDS4 drive ever worked before on that server?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Aneesh Mohan
Honored Contributor

тАО10-23-2008 12:41 AM

тАО10-23-2008 12:41 AM

Re: fbackup poblem

Hi Rohit,


Refer to this doc which shows some common causes for exit code 2:

http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000079312799

Aneesh
0 Kudos
Reply
Sreejith Kaliyam
Regular Advisor

тАО10-23-2008 12:45 AM

тАО10-23-2008 12:45 AM

Re: fbackup poblem

Hi,

See this also..

http://www11.itrc.hp.com/service/cki/docDisplay.do?docLocale=en&docId=emr_na-c00992607-2

Aneesh
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.