1752333 Members
5783 Online
108786 Solutions
New Discussion юеВ

Re: Help still needed

 
Gwendeline
Advisor

Help still needed

How to I configure a schedule backup . Sorry I still can get the tape backup working . More Help needed .
6 REPLIES 6
Steven E. Protter
Exalted Contributor

Re: Help still needed

1) Decide what backup software you want to use. Write a script to handle the backup.

2) man cron or man crontab. Use cron the schedule the backup. attaching the man page.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Gwendeline
Advisor

Re: Help still needed

I am trying to use amanda , I have installed it and the services is running but just could not figure out how to configure it or check if it's really working.
Huc_1
Honored Contributor

Re: Help still needed

A help link is

http://www.backupcentral.com/amanda.html

J-P
Smile I will feel the difference
Gwendeline
Advisor

Re: Help still needed

#mt -f /dev/st0 status
When I issue this , It seeem that it can't find the tape drive
Mark Grant
Honored Contributor

Re: Help still needed

See if you tape drive is really there.

"cat /proc/scsi/scsi" or "cdrecord -scanbus". This should show you if your tape drive is configured proeprly.
Never preceed any demonstration with anything more predictive than "watch this"
Guru Dutta
Frequent Advisor

Re: Help still needed

Guess scheduling the cron job is the best way so that no intervention us required.