how to display the console via DVI interface

[study unix]

Hi All,
Meet one problem, how to display the console via DVI interface based on rx3660?

[Torsten.]

There is a VGA connector only, but no DVI, right?

However, this is set via EFI conconfig command.

But keep in mind, once the console is on VGA, you no longer have MP console access!

[study unix]

Hi ,
use conconfig then to only return VGA and serial port without DVI, if it needs to do others configuration ?

[Torsten.]

IMHO the better option:

Leave the console on serial, doing this you have remote access.
Enable Xwindows on VGA, so you have a "normal" Xdesktop available.

[study unix]

HI Torsten,
it needs to connect with DVI interface not via VGA,!

[Torsten.]

IMHO there is no DVI connector on this server!

(expect you have any additional card, but then you cannot redirect the console to it)

[study unix]

Hi Torsten,
It has installed one PCI module in this server, so now it needs to be used,thanks!

[Torsten.]

I don't know what "PCI module" you have, but this might help:

http://docs.hp.com/en/AH391-9000A/AH391-9000A.pdf

[study unix]

Sorry , the correct name is DVI ! if you know of it! thanks!

[Torsten.]

@Eyeshot: Are you a duplicated thread owner?