1751851 Members
5276 Online
108782 Solutions
New Discussion юеВ

HPPM 4.0 Installation

 
SOLVED
Go to solution
George Sander
New Member

HPPM 4.0 Installation

Does HPPM 4.0 installed on hpux ver 11i v2 require a reboot?
6 REPLIES 6
smatador
Honored Contributor
Solution

Re: HPPM 4.0 Installation

Hi,
I do not think, the -r is just for windows and silent mode
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c00210166/c00210166.pdf
Torsten.
Acclaimed Contributor

Re: HPPM 4.0 Installation

No reboot needed, but there was a version 4.2 already in 2007. Check the web page.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
George Sander
New Member

Re: HPPM 4.0 Installation

Thanks for the input.
George Sander
New Member

Re: HPPM 4.0 Installation

What about required patches? This is 11i v1 not v2 as previously stated.
Emil Velez
Honored Contributor

Re: HPPM 4.0 Installation

There is a version 7 of this product. HP Performance Manager..

It installs without a reboot.
Torsten.
Acclaimed Contributor

Re: HPPM 4.0 Installation

I think it is the power manager ;-)

http://h18004.www1.hp.com/products/servers/proliantstorage/power-protection/software/power-manager/pm3-dl.html#b427

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!