HPE Community
Operating System - HP-UX
1753797 Members
7184 Online
108799 Solutions
New Discussion

Re: hpux 11.23 and StorageWorks 4314R Enclosure.

 
DJMC
Regular Advisor

‎02-23-2010 04:58 AM

‎02-23-2010 04:58 AM

hpux 11.23 and StorageWorks 4314R Enclosure.

Hi,
I have an old Compaq 4314R scsi 3 disk shelf which I'm thinking of using to add some storage to a test system. I am aware that the hardware is no longer suppported by HP but I'm wondering is there any reason why it wouldn't work on an rx2600 runnning HPUX 11.23.
The rx2600 already has a DS2300 disk shelf so the plan would be to daisychain to that.(I think, its been a while!)
Thanks in advance.
D
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎02-23-2010 05:13 AM

‎02-23-2010 05:13 AM

Re: hpux 11.23 and StorageWorks 4314R Enclosure.

The DS2300 has 14 slots and 2 controllers, each having a SCSI ID (depends on configuration).


How many SCSI IDs are available on a SCSI bus???



Forget daisy chaining!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.