1748183 Members
3552 Online
108759 Solutions
New Discussion юеВ

Ignite doubt.

 
Porthos
Occasional Contributor

Ignite doubt.

Is possible recover a ignite from RP8440(hpux-11.23) to a RP3440? via ignite server.

Regards.
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: Ignite doubt.

Hi Porthos,

IMHO for cross platforms this is always a question of trial and error, but I guess this should work, because the rp8440 image should have everything included what the small rp3440 needs. Just make sure you have all the latest patch bundles installed.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Marco A.
Esteemed Contributor

Re: Ignite doubt.

Hello Porthos,

When Ignite was created , the ideas was create an "image per server", or tape per server , the answer to that questions is "maybe" , nobody could ensure that's going to work or not, you must try and check for the results.

Regards,

Marco,
Just unplug and plug in again ....
Porthos
Occasional Contributor

Re: Ignite doubt.

thanks Marco, i go to make golden image and i hope the results...