Operating System - Linux
1748089 Members
5130 Online
108758 Solutions
New Discussion юеВ

Re: Install SupportPack 4.108 fails.

 
JBR
Frequent Advisor

Install SupportPack 4.108 fails.

Hi, I├В┬┤m trying to install the Integrity Linux SupportPack 4.108 in a RX2660 with RH4U7 + up2date and this fails.

In the pdf document says: "The Linux OS installation completes. HP recommends that you run the HP Support Pack installer
immediately after the installation of the OS is complete as described in Chapter 5 (page 37)."

Reinstall OS? Downgrade the OS? Install RPM├В┬┤s one by one bypassing install script?

Thanks in advance....
4 REPLIES 4
Modris Bremze
Esteemed Contributor

Re: Install SupportPack 4.108 fails.

How/where exactly does the support pack setup fail?
JBR
Frequent Advisor

Re: Install SupportPack 4.108 fails.

In the install.py python script.
Modris Bremze
Esteemed Contributor

Re: Install SupportPack 4.108 fails.

Ok..maybe there is an error message or other hints which suggest that the setup has failed? Or just the exit code?
JBR
Frequent Advisor

Re: Install SupportPack 4.108 fails.

I think that is in the verify Operating System Version.

The install.py check for the RPM package "redhat-release" ... but this is a Redhat Installation + up2date (yum) then "install.py" fail to determine the correct operating system version.