New Hard drive

[Dan_320]

I have a computer that i have decided to add a new hard drive as the only hard drive in the machine. It is a 120GB Maxtar and I want to install Linux only onto it. after i plug it in, everything seems to work fine, i will put the cd in and it will run through the whole Linux install cycle, but after i restart it will not work at all. a friend of mine told me i might have to manually change the hard drive information as far as sectors and stuff like that in the bios, but i am not to sure how to go about doing that. am i on the right track or not? thanks in advance.

[Ivajlo Yanakiev]

Bios:
Go to HDD location nad set Auto for your.
Do not set manula any value.
If your disk and bios are good they will work.

Take one Knopix CD live or boot from install CD and try to mount your DISK.

Or you may have problem with boot manager.
Install reinstall Grub or Lilo.

[Dan_320]

the hard drive came with a cd to help the instalation process but it says that it will only set the hard drive up for a type of windows. will that have any effect?

[Ivajlo Yanakiev]

I never had that :)
What kind of install make this CD.
How make up your disk ?
Frimware ?
or what ?

[Ivajlo Yanakiev]

Generaly you do not need any softwate for new disk. Linux cat take any IDE standart disk nad can work with it.
did you try to find some help on manufacturer SITE.
My be there are some linux tools for download.

[Dan_320]

i will try that and see what happens. ill let you know.

thanks

[NiCK_76]

Hi Dan,

It seems a hardware problem. Did your motherboard support 120G harddisk? Did your BIOS setting correctly?

NiCK

[Dan_320]

how do i check to see if the motherboard will support a 120GB hard drive?

[NiCK_76]

Offical website

[Alessandro_66]

Hi Dan,

Which kind of HD do you have? Is it a SATA HD? Could you post the error you have during the boot phase of your PC?