panic: I/O system hang during cold install of HP-UX 11.11

[somabho_1]

Hi,

When I do an cold-install with a image, after the initialization codes, I see the following errors messages & the system crashes.

====================================
Stored message buffer up to panic:
y Command - CDB: 12 00 00 00 40 00
SCSI Ultra320 1/0/2/0/1 instance 9: IO Type : MPT Domain Validation IO has
timed-out. Target ID: 4, LUN ID: 0. Inquiry Command - CDB: 12 00 00
00 40 00
SCSI Ultra320 1/0/2/0/1 instance 9: IO Type : MPT Domain Validation IO has
timed-out. Target ID: 4, LUN ID: 0. Inquiry Command - CDB: 12 00 00
00 40 00
SCSI Ultra320 1/0/2/0/1 instance 9: IO Type : MPT Domain Validation IO has
timed-out. Target ID: 4, LUN ID: 0. Inquiry Command - CDB: 12 00 00
00 40 00
DIAGNOSTIC SYSTEM WARNING:
The diagnostic logging facility has started receiving excessive
errors from the I/O subsystem. I/O error entries will be lost
until the cause of the excessive I/O logging is corrected.
If the diaglogd daemon is not active, use the Daemon Startup command
in stm to start it.
If the diaglogd daemon is active, use the logtool utility in stm
to determine which I/O subsystem is logging excessive errors.
SCSI Ultra320 1/0/2/0/1 instance 9: IO Type : MPT Domain Validation IO has
timed-out. Target ID: 4, LUN ID: 0. Inquiry Command - CDB: 12 00 00
00 40 00
SCSI Ultra320 1/0/2/0/1 instance 9: IO Type : MPT Domain Validation IO has
timed-out. Target ID: 4, LUN ID: 0. Inquiry Command - CDB: 12 00 00
00 40 00
SCSI Ultra320 1/0/2/0/1 instance 9: IO Type : MPT Domain Validation IO has
timed-out. Target ID: 4, LUN ID: 0. Inquiry Command - CDB: 12 00 00
00 40 00
SCSI Ultra320 1/0/2/0/1 instance 9: IO Type : MPT Domain Validation IO has
timed-out. Target ID: 4, LUN ID: 0. Inquiry Command - CDB: 12 00 00
00 40 00
SCSI Ultra320 1/0/2/0/1 instance 9: IO Type : MPT Domain Validation IO has
timed-out. Target ID: 4, LUN ID: 0. Inquiry Command - CDB: 12 00 00
00 40 00
SCSI Ultra320 1/0/2/0/1 instance 9: IO Type : MPT Domain Validation IO has
timed-out. Target ID: 4, LUN ID: 0. Inquiry Command - CDB: 12 00 00
00 40 00
SCSI Ultra320 1/0/2/0/1 instance 9: IO Type : MPT Domain Validation IO has
timed-out. Target ID: 4, LUN ID: 0. Inquiry Command - CDB: 12 00 00
00 40 00
SCSI Ultra320 1/0/2/0/1 instance 9: IO Type : MPT Domain Validation IO has
timed-out. Target ID: 4, LUN ID: 0. Inquiry Command - CDB: 12 00 00
00 40 00
SCSI Ultra320 1/0/2/0/1 instance 9: IO Type : MPT Domain Validation IO has
timed-out. Target ID: 4, LUN ID: 0. Inquiry Command - CDB: 12 00 00
00 40 00
SCSI Ultra320 1/0/2/0/1 instance 9: IO Type : MPT Domain Validation IO has
timed-out. Target ID: 5, LUN ID: 0. Inquiry Command - CDB: 12 00 00
00 40 00
SCSI Ultra320 1/0/2/0/1 instance 9: IO Type : MPT Domain Validation IO has
timed-out. Target ID: 5, LUN ID: 0. Inquiry Command - CDB: 12 00 00
00 40 00
SCSI Ultra320 1/0/2/0/1 instance 9: IO Type : MPT Domain Validation IO has
timed-out. Target ID: 5, LUN ID: 0. Inquiry Command - CDB: 12 00 00
00 40 00
SCSI Ultra320 1/0/2/0/1 instance 9: IO Type : MPT Domain Validation IO has
timed-out. Target ID: 5, LUN ID: 0. Inquiry Command - CDB: 12 00 00
00 40 00
SCSI Ultra320 1/0/2/0/1 instance 9: IO Type : MPT Domain Validation IO has
timed-out. Target ID: 5, LUN ID: 0. Inquiry Command - CDB: 12 00 00
00 40 00
SCSI Ultra320 1/0/2/0/1 instance 9: IO Type : MPT Domain Validation IO has
timed-out. Target ID: 5, LUN ID: 0. Inquiry Command - CDB: 12 00 00
00 40 00
SCSI Ultra320 1/0/2/0/1 instance 9: IO Type : MPT Domain Validation IO has
timed-out. Target ID: 5, LUN ID: 0. Inquiry Command - CDB: 12 00 00
00 40 00
I/O hardware probe timed out at path 1/0/2/0/1.

System Panic:

linkstamp: Fri Sep 10 18:33:06 MDT 2004
_release_version: @(#) $Revision: vmunix: vw: -proj selectors: CUP
I80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI
80_BL2000_1108' Wed Nov 8 19:24:56 PST 2000 $
panic: I/O system hang

PC-Offset Stack Trace (read across, top of stack is 1st):
0x002117b0 0x0039c560 0x009c37a4
0x0003fc40 0x00266358 0x0016658c
0x0041e460 0x00178028 0x00176074
End Of Stack

*** A system crash has occurred. (See the above messages for details.)
*** The system is now preparing to dump physical memory to disk, for use
*** in debugging the crash.

ERROR: Your system crashed before I/O and dump configuration was complete.
A crash dump cannot be taken under these circumstances without
special configuration. Contact your HP support representative.

=======================================

Please help me to find out where is the problem. I did a cold-installation with same image with success.

Sorry for making it a bit long .

Thanks in advance
Somabho

[Peter Leddy_1 · Accepted solution]

Hi,

See this thread, it certainly seems it may be some issue with your hardware devices. Have you opened a call with HP about it yet, they may be able to give a quick solution.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=655777

HTH,

Peter

[Dksin2010]

i Am also getting the same error , and not able to open that link , can someone please share it on my emailid - dksin2010@gmail.com

[Torsten.]

>> Am also getting the same error , and not able to open that link , can someone please share it on my emailid - dksin2010@gmail.com

So you have a problem with a scsi device too.

OPen a new thread, post messages, server model, etc ...