cancel
Showing results for 
Search instead for 
Did you mean: 

RX2600 not booting

 
Highlighted
Frequent Advisor

RX2600 not booting

I was performing an upgrade for the MP firmware on RX2600 when suddenly the connection timed out.
The MP was down even from console. When i tried to RESET the MP by pushing the button for more than 4 seconds the system started to led RED.
I tried to reboot but all i could receive is:
- Red system light
- Level 2 Red light
- Six successive beeps
and the system hangs out with no boot, no vga, no console display.
Any ideas?
2 REPLIES 2
Highlighted
Honored Contributor

Re: RX2600 not booting

Have you disconnected the power supply cables?
Try this and reconnect them after 10 seconds
Highlighted
Honored Contributor

Re: RX2600 not booting

Other than Luk's suggestion this may just be that 1 in 100 chance the the the FW update process croaked and you are left with a non-functioning MP.

Time to call HP for replacement.