General
cancel
Showing results for 
Search instead for 
Did you mean: 

unable to get machine identification

 
SOLVED
Go to solution
Highlighted
Frequent Advisor

unable to get machine identification

Hi guys,
I have an rp7410 split into two physical machines (one runs hpux11.11 and the other hpux 11.23
I need to pull out the machine identification number or the Software ID (I need this number in order to produce a Sybase license for this server).
However, when I run uname –i , I get the hostname instead of the number.
Also, print_manfest produce an empty clomun for Software ID
Also, in SAM when I go to system properties the machine identification is empty.
How can I get this number or generate it?

thanks ,
A.K.

6 REPLIES 6
Highlighted
Honored Contributor

Re: unable to get machine identification

run command

#print_manifest
a warrior never quits
Highlighted
Honored Contributor

Re: unable to get machine identification

Try with:
# getconf MACHINE_IDENT


regards,
ivan
Highlighted
Honored Contributor

Re: unable to get machine identification

Hi,

you are talking about host id i think. There is no host-id in hp-ux. in some documention it was written that it can be got by uname -i or
lanscan | grep 0x | cut -c12-23.

Kenan.
Computers have lots of memory but no imagination
Highlighted
Frequent Advisor

Re: unable to get machine identification

hi,
getconf MACHINE_IDENT
print_manifest
uname -i
all these commands does not return the machine identification.
any idea why?
thanks,
A.K.
Highlighted
Honored Contributor
Solution

Re: unable to get machine identification

Hi,

After a search, if you can't get MACHINE_IDENT value, you should open a call to hp. with ssconfig tool this value can be set. But this tool is not available to customers.

Kenan.
Computers have lots of memory but no imagination
Highlighted
Honored Contributor

Re: unable to get machine identification

Hi A.K,

Open a case with HP to reset your machine ID. The tools to do so are not available to customers. HP engineer can set this value, using the 'ssconfig' tool.

Regards,
Asif Sharif
Regards,
Asif Sharif