HPE 3PAR StoreServ Storage
1748261 Members
3573 Online
108760 Solutions
New Discussion

Re: 3PAR 7400 Hard LED Amber

 
Dennis Handly
Acclaimed Contributor

Re: 3PAR 7400 Hard LED Amber

If "showpd -s" doesn't show any errors, then you'll have to talk to HPE Support.

Are you sure you're looking at the right LED?

Does "locatecage -t 60 cage1 5" blink on the same PD?

 

>the attached file is ...

 

Please cut&paste the CLI output, not SSMC.

ArunKT
Visitor

Re: 3PAR 7400 Hard LED Amber

Hi FarzadH

Did you fix the issue with amber LED on the drive on 3PAR array? 

If the issue persists, let me know. 

Regards, 

Arun Kumar KT

ILYPAT
Occasional Advisor

Re: 3PAR 7400 Hard LED Amber

Hi FarzadH,

Would appreciate to know how the mentioned issue was resolved.

We have the same sympton as you have mentioned, 

Solid amber LED,

showpd -failed -degrade show no disk failed
showpd -s pdid show no error on the disk
showpd -path  both path a OK

Awaiting to know .

 

 

 

 

 

 

Torsten.
Acclaimed Contributor

Re: 3PAR 7400 Hard LED Amber

In same cases a reset of the I/O modules is needed - ask HPE support.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!