HPE 3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Re: Different time showing in 3PAR controllers

 
Highlighted
Occasional Contributor

Different time showing in 3PAR controllers

Hi All,

I have 2 controller nodes in 3PAR array and for some reason they both are showing different time. I have tried searching option to change it but cant find one.

Please note, that the time of sevice processor shows correct and we have configured NTP as well. But when i check time on systems it shows wrong and dont see any option to change over there.

OS - 3.3.1.410 (MU2)

hp_3par_san_833csm01 cli% showdate
Node Date
0 2020-07-15 13:51:22 AEST (Australia/Melbourne)
1 2020-07-15 13:24:08 AEST (Australia/Melbourne)
hp_3par_san_833csm01 cli%

4 REPLIES 4
Highlighted
HPE Pro

Re: Different time showing in 3PAR controllers

Hi Sandeep

Thank you for coming on HPE Community forums

I would request you to contact HPE technical support and log a case for this query to get it resolved, Cause they would help in configuring it step by step and also in running the script.

Regards
Mahesh202

I work for HPE

Accept or Kudo


[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Highlighted
HPE Pro

Re: Different time showing in 3PAR controllers

Hello

Please verify if NTP is configured for array using #shownet and check if NTP is configured.

To set the date using Network Time Protocol (NTP), use the "setnet ntp" command to specify an NTP server. The date willnot change immediately, as NTP corrects the time slowly to avoid issues

If not other option is to set date manually by using #setdate command. Refer below document(325)

https://support.hpe.com/hpesc/public/docDisplay?docId=c04204279

Regards,

Veena

 

 

To set the date using Network Time Protocol (NTP), use the "setnet ntp" command to specify an NTP server. The date willnot change immediately, as NTP corrects the time slowly to avoid issues


I Work for HPE

Accept or Kudo

Highlighted
HPE Pro

Re: Different time showing in 3PAR controllers

Hi Sandeep,

You can correct the node time with setdate command. Syntax is 'setdate <MMDDhhmm>'. Below is the example demonstrates the complete procedure:

3PAR8440 cli% showdate
Node Date
0 2018-01-26 15:52:53 AST (Asia/Kuwait)
1 2018-01-26 15:54:03 AST (Asia/Kuwait)
3PAR8440 cli% setdate 01261555
You have specified the date as 2018-01-26 15:55:00 AST
Is this correct?
select y=yes n=no: y
Node 0 time set to 2018-01-26 15:55:00 AST
Node 1 time set to 2018-01-26 15:55:00 AST
3PAR8440 cli% showdate
Node Date
0 2018-01-26 15:55:03 AST (Asia/Kuwait)
1 2018-01-26 15:55:03 AST (Asia/Kuwait)

 

Regards,

Srinivas


I am an HPE Employee

Accept or Kudo

Highlighted
HPE Pro

Re: Different time showing in 3PAR controllers

Hi @Sandeep9 ,

I hope the details were helpful to fix the issue.

Please let me know how it went or if you need further assistance.

Regards,

Srinivas


I am an HPE Employee

Accept or Kudo