HPE Community
HPE 3PAR StoreServ Storage
1751936 Members
4597 Online
108783 Solutions
New Discussion

login failed when I configure a new 3par (OOTB)

 
louisji2008
Regular Advisor

‎08-15-2017 05:24 PM

‎08-15-2017 05:24 PM

login failed when I configure a new 3par (OOTB)

I have a 4 node 8400, its OS is 3.2.2.
It is a new one and I need install and configure it.
After input 'console' when the system startup, the system wait for around 30 seconds and displayed 'login time out'. There is no password input step.

I've tried every 4 nodes and reboot the whole 3par 8400, nothing changed.

Is this a product issue?


How time flies~~~
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎08-15-2017 11:22 PM

‎08-15-2017 11:22 PM

Re: login failed when I configure a new 3par (OOTB)

Better follow the installation guide. Setup the (v)SP first, add the array, set a password from the SP during the install procedure.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.