1748170 Members
4188 Online
108758 Solutions
New Discussion юеВ

Re: 3PAR shutdown

 
KINGSLEY_1
Regular Advisor

shutdown

Dear All,

 

Please how do i shutdown 3PAR 7400 from GUI or CLI.

 

thank you 

 

 

kingsley

 

 

P.S. This thread has been moved from HP-UX > System Administration to HP 3PAR StoreServ Storage. - Hp Forum Moderator

5 REPLIES 5
Torsten.
Acclaimed Contributor

Re: 3PAR shutdown

It is not a hp-ux related question but however, this should apply to all 3par arrays:

 

http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03003867#N10058


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Dennis Handly
Acclaimed Contributor

Re: 3PAR shutdown

There is the "shutdownsys halt" CLI command.

KINGSLEY_1
Regular Advisor

Re: 3PAR shutdown

do i type it at the Cli% ?

 

thanks

 

 

kingsley

Torsten.
Acclaimed Contributor

Re: 3PAR shutdown

see page 26:

 

http://h10032.www1.hp.com/ctg/Manual/c03775422

 

 

chapter "powering off/on"


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Dennis Handly
Acclaimed Contributor

Re: 3PAR shutdown

>do I type it at the Cli%?

 

Yes, or directly with ssh or remote CLI client.