SSMC 3.3.1 "Fabrics" view of Brocade ports

[kuibird1953]

Has anybody seen the issue that the Fabric ports view in SSMC displays the wrong ports for connection to SN6600B Brocade Switches. Please see screenshot in the attachment.....

[SUBHAJIT KHANBARMAN_1]

Thanks for highlighting these but SSMC 3.3.1 is old and you should upgrade to SSMC 3.7

Download link,

https://myenterpriselicense.hpe.com/cwp-ui/free-software/SSMC_CONSOLE

Release notes,

https://support.hpe.com/hpesc/public/docDisplay?docId=a00101448en_us&docLocale=en_US

Administrator guide (SSMC 3.6)

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00085216en_us&docLocale=en_US (Page 58 onwards)

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

***********************************************************************

[kuibird1953]

From the document you highlighted above: "SSMC 3.3.1 will remain available as software installation on select Windows and Linux OS versions."

We dont have a virtual environment to place it at at the moment that is why we are using 3.3.1

[SUBHAJIT KHANBARMAN_1]

@kuibird1953 

Yes you are correct. I have corrected my statement in previous post.

I would suggest to log a HPE official support case so that we can investigate this matter further.

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

*************************************************************************

[kuibird1953]

Thanks Subhajit.

I did open a case with HPE(5348436859 ) and their last suggestion was to de-install and re-install the SSMC. I am very hesistant to do that as the SSMC controls 3 different Arrays. I would simply like to know if this is a "Knowned" bug and if it is tryly fixed in newr versions.

[SUBHAJIT KHANBARMAN_1]

Can you please provide the below outputs from 3PAR commandline,

showportdev ns 0:0:1
showportdev all 0:0:1
showportdev fcswitch 0:0:1
showportdev findport 20010022AC02507B 0:0:1

showport -par

Also please provide below output from SN6600-TOP,

switchshow

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

************************************************************************