attn LED is flashing

[Reiner Mueller]

RP5400 flashes the LED "Attn" at the server!

How can one turn this LED off?

[Robert-Jan Goossens]

Hi Reiner,

You will have to logon to the GSP from your console and read the error logs.

from console, press ctrl+b
GSP> sl
press 'e'
press 'n' (for filtering)
press 'q' (quit)
GSP> co (back to console)

Hope this helps,
Robert-Jan

[Isaac_4]

Hi:

To turn off :
Press ctrl-b
gsp>sl
use e error
use n for filter
press enter , when the led attention is off
press q
use co to back console mode

good luck !!!

[Robert_Jewell]

Lets not forget to read the alert that caused the ATTN LED to light. Something relating to a bad boot attempt can be ignored of course, but if you have a fan or power supply failure, the system is trying to tell you this.

Just my 2c.

-Bob