HPE 9000 and HPE e3000 Servers
1748211 Members
4862 Online
108759 Solutions
New Discussion юеВ

Re: can't open cdrom after ILO firmware upgrade

 
Ivan Doroshuk
Advisor

can't open cdrom after ILO firmware upgrade

Hi,

I have some small problems with my rp3440s. After I put the CD and updated the firmware of my management cards ( and reseted it a few time ) The CDROM device won't open. the drive is not mounted on hp-ux, pfs_mountd and pfsd are not started.
12 REPLIES 12
Dennis Handly
Acclaimed Contributor

Re: can't open cdrom after ILO firmware upgrade

What HP-UX version?
Why are you even thinking using pfs_mountd and pfsd?
Ivan Doroshuk
Advisor

Re: can't open cdrom after ILO firmware upgrade

Hello,
the hp-ux version is 11.11

For the pfs_mountd it's because I want just want to make sure that's not because the drive is mounted or locked by the OS
Dennis Handly
Acclaimed Contributor

Re: can't open cdrom after ILO firmware upgrade

>For the pfs_mountd

I was suggesting you remove that demon from the system as causing other problems. ;-)
George_Dodds
Honored Contributor

Re: can't open cdrom after ILO firmware upgrade

I've had this happen for no apparent reason on pa-risc and itanium systems and it required a patch upgrade to sort it.
Torsten.
Acclaimed Contributor

Re: can't open cdrom after ILO firmware upgrade

Consider this can be a pure mechanical problem. Carefully pull the drive and inspect it. Sometimes the top cover press too much on the drive, hence it cannot open.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Ivan Doroshuk
Advisor

Re: can't open cdrom after ILO firmware upgrade

A patch upgrade ? Do you know which patch it is ? A ILO firmware upgrade ? Or a 11iv1 upgrade ?


For the mechanical malfunction, the device light stay off when I push the button... So I doubt it's the problem. It look like it's mounted of some sort.
Sameer_Nirmal
Honored Contributor

Re: can't open cdrom after ILO firmware upgrade

Have you tried to operate the drive outside OS OE?
Torsten.
Acclaimed Contributor

Re: can't open cdrom after ILO firmware upgrade

Just to check you should shutdown the OS and try, just to ensure it is not a mounting issue.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Ivan Doroshuk
Advisor

Re: can't open cdrom after ILO firmware upgrade

first thanks for all your responses.

For the shutdown, that won't be easy, most of the server are on production.