HPE Community
HPE 9000 and HPE e3000 Servers
1753516 Members
5299 Online
108795 Solutions
New Discussion юеВ

Re: Convert n4000(a3639a/b) to rp7400(a3639c)

 
Torsten.
Acclaimed Contributor

тАО06-01-2006 06:08 PM

тАО06-01-2006 06:08 PM

Re: Convert n4000(a3639a/b) to rp7400(a3639c)

If you change the box, you will have another SW ID (used for licence purposes), but a valid one.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
giriplug
Frequent Advisor

тАО06-08-2006 04:05 PM

тАО06-08-2006 04:05 PM

Re: Convert n4000(a3639a/b) to rp7400(a3639c)

hi Torsten,

is the 10 digits are the software id ur talking about when i run the uname -a as below
B.11.00 U 9000/800 1279364181 unlimited-user license

but if i were to change the motherboard what will the effect be to the numbers? changed/nothing?

0 Kudos
Torsten.
Acclaimed Contributor

тАО06-08-2006 10:28 PM

тАО06-08-2006 10:28 PM

Re: Convert n4000(a3639a/b) to rp7400(a3639c)

The ID (in your case 1279364181 ) is based on the product and serial number. If the serial number is changed, the ID will change too. YOU can't change it back, only HP can do this.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
giriplug
Frequent Advisor

тАО06-11-2006 05:38 PM

тАО06-11-2006 05:38 PM

Re: Convert n4000(a3639a/b) to rp7400(a3639c)

hi torsten,

one more thing,if i would take away the internal disks from the old n class which has the customers current OS confguration in it and put in into the rp7400,will it boot up as normal?
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.