Default MP login for rp3410

[Kaps_2]

can anybody pls tell whats the default MP IP address for rp3410 server.ASAP.

Thanks

[Ivan Krastev]

Use arp to assign IP address to ILO (MP). See documentation - http://docs.hp.com/en/5991-5984/ch03s05.html?btnNext=next%A0%BB

regards,
ivan

[Kaps_2]

thanks a lot for the info...actually the problem with the server is that its giving an beep sound..i have seen all the logs but could not find anything.But in demeg I found something as overcurrent...do u have any idea abt this...I have attatched the dmesg output.Pls let me know ASAP.

Thanks

Kaps

[Ivan Krastev]

This message "overcurrent 0x0" is a result of querying the hardware during system boot.

This is from USB ports.


regards,
ivan

[Torsten.]

Regarding the IP address:

The hostname of the MP is mp+mac address (written on a sticker on the chassis, e.g.

mp123456789

[Torsten.]

sorry forgot this info:

it is set to use DHCP.

[Kaps_2]

Thanks...but do u have any idea why the system is giving out a beep sound continously....?

[Torsten.]

Do you have any USB device connected? Try to remove it. Beep means error/fault.

[Kaps_2]

nothing is connected to the USB port...even all the LED status is green...any idea...?

[Torsten.]

This doesn't look good:

0/0/1/0 hcd
0/0/1/0.1 hub
probe: port 3 overcurrent 0x0
0/0/1/1 hcd
0/0/1/1.1 hub
probe: port 2 overcurrent 0x0


This are the USB ports. If nothing is connected, there must be something wrong with the ports (hub) itself.
I would suggest to involve the HP support folks.