HPE Community
HPE 9000 and HPE e3000 Servers
1753774 Members
7047 Online
108799 Solutions
New Discussion

Re: Enable MP/SCSI board on rp7405

 
Giuseppe Bertolotti
Occasional Contributor

‎03-15-2004 09:20 PM

‎03-15-2004 09:20 PM

Enable MP/SCSI board on rp7405

Hi!
I've a rp7405 4 way with 2 MP/SCSI board but only the primary is active. How to enable both primary and secondary MP/SCSI board?

Thanks.
Andrea D'Agostino
0 Kudos
1 REPLY 1
Stefan Stechemesser
Honored Contributor

‎03-15-2004 09:28 PM

‎03-15-2004 09:28 PM

Re: Enable MP/SCSI board on rp7405

Hi Andrea,

the MP/SCSI board consists of two functions on one board. The MP (Management Processor) and the SCSI ( Core I/O) function.

1.) MP
There is only one MP active in the rp7405 (the master MP, lower one). The 2nd MP is not used.

2.) SCSI / Core IO
The SCSI function does only work if a cellboard is connected to the MP/SCSI card.
=> You need 2 cellboards if you want to use both Core IOs.

I hope this helps

Stefan

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.