HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

enable process in rp3440

 
Highlighted
Super Advisor

enable process in rp3440

Hi Team,

i hv seen one of my processor in deconfigured state on rp3440.i suspect somebody might have disabled this processor due to oracle license issue...how to enable this processor(hpux 11.11)..i hv tried CPU 1 ON from pdc menu ,but still not working


Processor Speed State CoProcessor State Cache Size
Number State Inst Data
--------- -------- --------------------- ----------------- ------------
0 1000 MHz Active Functional 67108864 67108864
1 1000 MHz Stopped:Deconfigured Unknown 0 0


rgds,trng
administrator
12 REPLIES 12
Highlighted
Acclaimed Contributor

Re: enable process in rp3440

This could even be the very entry level version of this server with only one core enabled.

Could you please run from boot menu


...menu> in all

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Regular Advisor

Re: enable process in rp3440

Hi,
Reboot the server and interrupt the boot process to access the Main Menu prompt.
Menu> co cpu
Note the cpu id and then
Menu> co cpu on
reboot the machine.
Highlighted
Regular Advisor

Re: enable process in rp3440

Hi,
Reboot the server and interrupt the boot process to access the Main Menu prompt.
Menu> co cpu
Note the cpu id and then
Menu> co cpu on
reboot the machine.
Highlighted
Regular Advisor

Re: enable process in rp3440

Sorry, consider the first reply.
Highlighted
Super Advisor

Re: enable process in rp3440

Hi ,

PROCESSOR CONFIGURATION INFORMATION

Processor hpa Configuration Status
--------- ------------------ ----------------------------------------
0 0xfffffffffe780000 Configured, not flagged to be deconfigured

1 0xfffffffffe781000 Deconfigured, not flagged to be reconfigured

Processor Speed State CoProcessor State Cache Size
Number State Inst Data
--------- -------- --------------------- ----------------- ------------
0 1000 MHz Active Functional 67108864 67108864
1 1000 MHz Stopped:Deconfigured Unknown 0 0


rgds,trng
administrator
Highlighted
Acclaimed Contributor

Re: enable process in rp3440

Can you tell what the product number of the server is?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Super Advisor

Re: enable process in rp3440

Hi Torsten,

HPUX Model Number......: rp3440#1
HPUX Model String......: 9000/800/rp3440#1
Original Product Number: A7137A
Current Product Number.: A7137A


rgds,trng
administrator
Highlighted
Acclaimed Contributor

Re: enable process in rp3440

The #1 indicates the system can only use 1 core. You need to "buy" the second.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Super Advisor

Re: enable process in rp3440

Hi Torsten,

Understood from old support engineer that ,customer has purchased the license key to activate the second processor ...i dont know where it is now and systems are out of support ..is it a paper license ?...if yes,how to activate the processor core ?

rgds,trng
administrator