HPE Community
HPE 9000 and HPE e3000 Servers
1753544 Members
5997 Online
108795 Solutions
New Discussion юеВ

GSP Access on rp 2470

 
SOLVED
Go to solution
Grayh
Trusted Contributor

тАО09-19-2008 10:14 AM

тАО09-19-2008 10:14 AM

GSP Access on rp 2470

Hi All,

I do not have telnet access to the GSP on the rp2470... nor do I have the IP address for it... I do not know if an Ip has been configured for it.

Now I would like to access the GSP also remotely say from telnet or ssh.

How should I proceed...

Thank you
0 Kudos
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО09-19-2008 10:43 AM

тАО09-19-2008 10:43 AM

Solution

Re: GSP Access on rp 2470

Connect via serial line, get the lan information.

GSP> ls

configure if needed

GSP> lc

set up a user, if not already done, see

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1270620


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Grayh
Trusted Contributor

тАО09-25-2008 01:13 PM

тАО09-25-2008 01:13 PM

Re: GSP Access on rp 2470

thank u
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.