HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

GSp reset on Superdoms

 
Highlighted
Regular Advisor

GSp reset on Superdoms

We need to reset GSP on a Superdome, It will be great if some one can share the info, how to reset GSP on superdome using GSP command.

Thanks in Adv.
Let the choices you make today be the choices you can live with tomorrow.
7 REPLIES 7
Highlighted
Honored Contributor

Re: GSp reset on Superdoms

Check this link

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=220897

or better search itrc with "reset GSP"

sks
A rigid mind is very sure, but often wrong. A flexible mind is generally unsure, but often right.
Highlighted
Regular Advisor

Re: GSp reset on Superdoms

Thanks Sajay,

But I already tried "stty +resetGSP < /dev/GSPdiag1 " option but it was not working. I think there may be some difference in superdoms GSP,

any chance ?
Let the choices you make today be the choices you can live with tomorrow.
Highlighted
Honored Contributor

Re: GSp reset on Superdoms

Hello,

As far as I know, the stty way to reset GSP is not unsupported and doesn't work any more due to new patch bundles.

I guess you need to reset the GSP using the hard way. I never worked on Superdomes, but on smaller machines like L-Class and N-Class, you have to access GSP by typing CTRL-B on the console, then type XD and r .

HTH,
Vince
Tape Drives RULE!!!
Highlighted
Honored Contributor

Re: GSp reset on Superdoms

Hello,

Errata... stty way to reset GSP is not SUPPORTED.

HTH,
Vince
Tape Drives RULE!!!
Highlighted
Regular Advisor

Re: GSp reset on Superdoms

Thanks Vince,

I think I need to to a Hard reset, coz I'm unable to find XD option on my GSP
Let the choices you make today be the choices you can live with tomorrow.
Highlighted
Honored Contributor

Re: GSp reset on Superdoms

Highlighted
Honored Contributor

Re: GSp reset on Superdoms

The SuperDome does have an XD command under GSP. You do have to know where to find it, and have Admin or Operator authority.

It is under the Command Menu (cm),
System and Access Config Commands. Here is a SuperDome doc on the topic:

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/B2355-90702/B2355-90702_top.html&con=/hpux/onlinedocs/B2355-90702/00/00/21-con.html&toc=/hpux/onlinedocs/B2355-90702/00/00/21-toc.html&searchterms=GSP%7csuperdome&queryid=20040416-152204