HPE 9000 and HPE e3000 Servers
1748038 Members
4940 Online
108757 Solutions
New Discussion юеВ

Re: Hardware scan of cards failed in sam

 
manu_9
Frequent Advisor

Hardware scan of cards failed in sam

when i open the SAM and go to peripheral and devices to see the cards (OLAR) , system gives the error , that hardware scan failed , what can be the cause.
14 REPLIES 14
YoungHwan, Ko
Valued Contributor

Re: Hardware scan of cards failed in sam

Your system have to be installed lpr2 in the kernel driver. To resolve this problem

1. You must include "lpr2" in the kernel dirver, and then reboot your system.

2. Login as a root.

3. check lpr2 driver is installed.
# ioscan -f -k

4. Add 'parallel printer' using sam.

Shaikh Imran
Honored Contributor

Re: Hardware scan of cards failed in sam

Hi,

Can you tell which card are you trying to add online ?
What is your system ?

Regards,

I'll sleep when i am dead.
Bharat Katkar
Honored Contributor

Re: Hardware scan of cards failed in sam

HI,
Do
# lsdev
See if the driver required is listed.

Regards,
You need to know a lot to actually know how little you know
manu_9
Frequent Advisor

Re: Hardware scan of cards failed in sam

My system is not listing any of the OLAR Capable cards .when i try to go to the screen an select cards , it throws the error , My other systems give some o/p indicating that this card is Olar Capable or not
Shaikh Imran
Honored Contributor

Re: Hardware scan of cards failed in sam

Hi,
What is your server model and PDC revision..
Pls check this link also.
Do you have OLAR Capable cards & also the other server config is same as this one.. ?


http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=41209


Regards,


I'll sleep when i am dead.
manu_9
Frequent Advisor

Re: Hardware scan of cards failed in sam

My PDC Revision is 2.35 and Model N-4000
Shaikh Imran
Honored Contributor

Re: Hardware scan of cards failed in sam

Shaikh Imran
Honored Contributor

Re: Hardware scan of cards failed in sam

Hi,

I think you mentioned CPU revision.
not the firmware revision the number should be 40 or above 40..

Regards,

I'll sleep when i am dead.
Shaikh Imran
Honored Contributor

Re: Hardware scan of cards failed in sam

Hi,

These OLAR operations should not be
performed on these systems until the PDC of the system is upgraded to revision 41.36.

Regards,



I'll sleep when i am dead.