HPE 9000 and HPE e3000 Servers
1748027 Members
4205 Online
108757 Solutions
New Discussion юеВ

Re: How can I check battery status from MP?

 
Samshen
Frequent Advisor

How can I check battery status from MP?

Hi all,
I want to check the GSP battery status . I see that it can be done by issuing "battery" command from BCH "service" menu, but to access BCH requires the server to reboot.
Does anyone know how to check the battery status from MP?

Thank you
2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: How can I check battery status from MP?

The command you talking about refers to the battery on the cell, *not* the MP.

I assume for this reason you have a cell-based system.

You need to go to the MP command menu and run
PS and select the MP.
(same result you will get by running "DE" (display entity) and select the MP.

You will see something like:

"Battery state is good"

What is your exact server model?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Samshen
Frequent Advisor

Re: How can I check battery status from MP?

Hi Torsten,
I have a server rp7410 (A6752A). I saw the logs of some times before and there was logged the Event number 1352. The recommended action was to replace the battery. But as this event has some days that happened and I see no other alarms related, I want to check if the battery is good now (has enough voltage) and is not neccessary to replace the battery.

Thank you