HPE 9000 and HPE e3000 Servers
1748031 Members
4915 Online
108757 Solutions
New Discussion

Re: how to boot a vpar for MP CONSOLE?

 
huaxiang
Frequent Advisor

how to boot a vpar for MP CONSOLE?

how to boot a vpar for MP CONSOLE?
i want to test the system disk mirror?
1 REPLY 1
Torsten.
Acclaimed Contributor

Re: how to boot a vpar for MP CONSOLE?

You cannot interact with the boot loader, but you can force the boot to use the alternate path, example:

To boot winona2 using the configured alternate path:
winona2# vparboot -p winona2 -B alt

Same way to boot into single user mode:

winona1# vparboot -p winona2 -o â -isâ

or boot from tape:

winona1# vparboot -p winona2 -B TAPE


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!