HPE 9000 and HPE e3000 Servers
1748140 Members
3638 Online
108758 Solutions
New Discussion юеВ

HP server Console problem.

 
SOLVED
Go to solution
Durvesh Mendhekar
Regular Advisor

HP server Console problem.

Hi,

We have HP rp2430 server but we are not able to take console.When we connect to server but we are not getting MP login prompt.Connections are ok.We have also reset the MP but same problem.
Please help me out to resolve this.

Regards,
Durvesh M
8 REPLIES 8
Fabio Ettore
Honored Contributor
Solution

Re: HP server Console problem.

Hi,

it sounds like an HW issue with cable or port of the console connections.
Have you checked them?

Best regards,
Fabio
WISH? IMPROVEMENT!
SUDHAKAR_18
Trusted Contributor

Re: HP server Console problem.

Hi,
Can you try to access MP through serial console ?
Durvesh Mendhekar
Regular Advisor

Re: HP server Console problem.

Hi,

Yes, i have tried with serial console too and check all the necessary connection but still same problem.

Regards,
Durvesh
Michal Kapalka (mikap)
Honored Contributor

Re: HP server Console problem.

hi,

it could be a broken HW part.

mikap
Ganesan R
Honored Contributor

Re: HP server Console problem.

Hi Durvesh,

I am not sure how you did MP reset. You need to press few seconds and release the reset button to hard reset the MP.

If still it is not working, log a hardware case with HP to check and get it replaced.
Best wishes,

Ganesh.
Nido
Trusted Contributor

Re: HP server Console problem.

Hi Durvesh,

As suggested, isolate the problem by checking if you've got the good Serial Cable to connect to Console Port.
Try reseting the GSP from the rear of the MAchine (a small button which is beside TOC button)

Thanks,
" Let Villagers Be Happy!! "
Bill Hassell
Honored Contributor

Re: HP server Console problem.

Note that there are two completely incompatible serial cables. If you are using a PC or a real terminal, you must use a crossover or null-modem cable. In the store, these are also called serial printer cables. Set the PC or terminal to 9600 baud, 8N1. You'll need to use the serial cable to set the IP address (and subnet, gateway, etc) for the LAN console connection.


Bill Hassell, sysadmin
Durvesh Mendhekar
Regular Advisor

Re: HP server Console problem.

Hi,

Thanks for the support.

Regards,
DurveshM