HPE 9000 and HPE e3000 Servers
1748181 Members
3356 Online
108759 Solutions
New Discussion юеВ

Re: hp unix server problem

 
mahesh.k
New Member

hp unix server problem

server console terminal not giving the console login,the server will given the FAULT[red],ATTENTION on front side ,we are checked the console cable also,we are connected cable in another server also ,not giving login display,the cursor will continously blinking
8 REPLIES 8
SUDHAKAR_18
Trusted Contributor

Re: hp unix server problem

which model ?

have you tried to connect using MP?
Jitesh purohit_1
Regular Advisor

Re: hp unix server problem

Hi Mahesh,

Did you tried to connect go GSP/MP

when you are prompted for the GSP username, just hit and do the same thing for the GSP password. Many people don't realize that the password is not set by default. I hope that this helps.

Also check for GSP card status...

Jitesh
Michal Kapalka (mikap)
Honored Contributor

Re: hp unix server problem

hi,

check the model, for example in some servers in our datacenter we don't have the MP/GSP, and them you need to connect directly to the serial port and use a special key, to access the console.


mikap
Steven E. Protter
Exalted Contributor

Re: hp unix server problem

Shalom,

A fault light could indicate a hardware fault of major software crash.

You could try a power off power on, depending on the problem that might get you going.

Better is to connect to the console bet it GSP/MP or a direct serial connect to the console port with a null modem cable.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Roopesh Francis_1
Trusted Contributor

Re: hp unix server problem

Was your terminal console worked ealier with same console cable?
Probably it connected through wrong cable. Why don├в t you try to connect through GSp/MP
Torsten.
Acclaimed Contributor

Re: hp unix server problem

The red LED indicates a major problem, the server is probably not up and cannot show you anything on the console.

Inspect the system and console log for more information, e.g.

MP> sl

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
mahesh.k
New Member

Re: hp unix server problem

we have rp2470 series servers,i have checked the console login through hyper terminalin pc,we got the login in another 2 servers properly,but we can't get the login in the problem server[primary].i think doubt in console cable or console port of server,but terminal will not give any display
Torsten.
Acclaimed Contributor

Re: hp unix server problem

Tell us what server it is and post the logs from MP.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!