HPE Community
HPE 9000 and HPE e3000 Servers
1752478 Members
5532 Online
108788 Solutions
New Discussion юеВ

Re: HP9000 K210 Hardware address internal dat drive

 
SOLVED
Go to solution
pj_11
Super Advisor

тАО01-31-2007 02:56 AM

тАО01-31-2007 02:56 AM

HP9000 K210 Hardware address internal dat drive

Hello,

Could someone trnsaltes to me what the scsi id is set on is this.Does this mean it has no jumpers on the back of the drive so it is 0.

10/12/5.0
10/12/5.0.0

PJ.
0 Kudos
2 REPLIES 2
A. Clay Stephenson
Acclaimed Contributor

тАО01-31-2007 03:26 AM

тАО01-31-2007 03:26 AM

Solution

Re: HP9000 K210 Hardware address internal dat drive

With no jumpers installed, the SCSI ID is 0 -- which was the most common setting for internal DAT drives.
If it ain't broke, I can fix that.
0 Kudos
pj_11
Super Advisor

тАО01-31-2007 03:35 AM

тАО01-31-2007 03:35 AM

Re: HP9000 K210 Hardware address internal dat drive

Thank you resloved.

PJ
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.