HPE 9000 and HPE e3000 Servers
1748038 Members
4820 Online
108757 Solutions
New Discussion юеВ

installing more memory

 
SOLVED
Go to solution
Lisa Dingman
Regular Advisor

installing more memory

I am very new to sys admin and need some help if possible. We have an rp5470 with the following memory configuration:(below). We have purchased 4-1024 memory sticks. I read in a post that these need to be installed in order, so do I need to remove what we have and install 0a,0b...3b or can I leave the memory as is and install into empty slots in order? thank you in advance for answering
Memory Board Inventory

Extender

Slot Num Configured and Slot label for each DIMM (MB)

-------- --------------------------------------------

0a 2a 1a 3a 3b 1b 2b 0b

---- ---- ---- ---- ---- ---- ---- ----

EXT 0 1024 0 1024 0 0 1024 0 1024

------------------------------------------------------

System Total (MB): 4096

6 REPLIES 6
Torsten.
Acclaimed Contributor
Solution

Re: installing more memory

You currently have dimms in 0a/b and 1a/b. Because the new dimms have the same size, just install them in 2a/b and 3a/b.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Lisa Dingman
Regular Advisor

Re: installing more memory

Thank you very much! I will figure out how to assign points and do so, I appreciate your help.
YAQUB_1
Respected Contributor

Re: installing more memory

Hi,

U can also check URL site, how U can DIMM memory repalce or upgrade......

http://www.docs.hp.com/en/A5191-96018/ch07s02.html#chdchidf
(Memory DIMM Removal & Memory DIMM Replacement)

BR/
Yaqub
YAQUB_1
Respected Contributor
Lisa Dingman
Regular Advisor

Re: installing more memory

Thank you, I had downloaded the information, everything should be good to go thanks to all your help!
denitoso
New Member

Re: installing more memory

Remember the rules for installing memory

Extender = i smore important than the Extender 1

Now the order should be:

a/0b 1a/1b......

try to fill everything in that order, putting the pair odf memories in size order as well